SikaGrout 212 25KG

SikaGrout® 212 is a non-shrink, cementitious grout with a unique two-stage shrinkage compensating mechanism, (compensating for shrinkage in both plastic and hardened states). It is non-metallic, contains no chlorides and may be placed at various consistencies ranging from dry pack to fluid by simply adjusting the quantity of mixing water.

Where to use:

• On grade, above and below grade, interior and exterior applications
• Structural grouting of column base plates, machine base plates, anchor bolts, bearing plates, bridge seats, precast wall panels
• On grouting projects where ability to adjust consistency and achieve accelerated strength development is required

Advantages:

• Pre-blended for easy application and maximum field control. Just add water, mix and place
• Versatile, can be applied in any consistency from dry pack to fluid by varying water content
• Reducing water content accelerates strength development and ultimate compressive strength values
• Non-corrosive does not contain chlorides
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR)
• Excellent pumpability – does not segregate even at high flow; no build-up on equipment hopper
• Low heat development
• Superior freeze/thaw resistance
• Ministry of Transport Ontario approval for use in grouting bridge bearings and anchor bars (Reports MI-110 & MI-120)
• Product qualified by The Road Authority (TRA)
• Meets Ontario Hydro specification M-690-87 for pumping through grout pump and hoses for a distance of up to 60 m (196 ft)
• Ministère des Transports du Québec acceptance for grouting anchor bolts and reinforcing dowels in concrete
• Approved by the Alberta Ministry of Transportation
• Product recognized by the British Columbia Ministry of Transportation (BC MoT)
• Meets H. A. Simons grout specification 1S-05.01 for grout types 1, 2a, 2b, 2c, 3 and 4
• Meets ASTM C1107 for Grade C type grouts